Este driver integra o piso aquecido Álamo Piso Térmico ao sistema Nice/ELAN, pela rede local, através do gateway Álamo.
O driver ZoomDH Alamo Thermostat Gateway consulta o gateway e cria no ELAN um termostato para cada termostato Wi-Fi configurado nele, identificado pelo endereço MAC.
Recursos suportados
Descoberta automática: os termostatos configurados no gateway são criados no ELAN como Termostato <MAC>.
Liga/desliga: modos Heat (ligado) e Off (desligado) de cada termostato.
Setpoint de aquecimento: ajuste da temperatura desejada do piso, em graus Celsius, até 34 °C.
Temperatura ambiente e estado: temperatura medida e indicação de aquecimento ativo, atualizadas periodicamente.
Status da comunicação: o gateway é consultado no intervalo configurado e reconectado se parar de responder.
Qualquer recurso não especificamente indicado como suportado deve ser considerado sem suporte, inclusive renomear termostatos pelo driver, gravar presets e bloquear o termostato.
Pré-requisitos
Gateway Álamo Piso Térmico ligado por cabo na mesma rede dos termostatos.
Termostatos configurados no Wi-Fi e no app Piso Térmico, conforme as instruções do fabricante.
Gateway acessível pelo controlador ELAN na porta HTTP 5000. Defina um IP fixo no gateway ou reserve o IP no servidor DHCP.
No Nice Configurator, abra a guia Climate e adicione um novo Communication Device.
Use a busca para localizar a pasta onde salvou o driver, selecione ZoomDH Alamo Thermostat Gateway e clique em OK.
Informe o endereço IP do gateway. A porta padrão é 5000.
Insira a chave de licença no campo License Key, após adquiri-la, e confira o License Status.
Clique em Discover Devices. Os termostatos aparecem em Climate > Thermostats, com o nome Termostato <MAC>. Não adicione termostatos manualmente.
Renomeie os termostatos no Configurator. Use o endereço MAC, mostrado no app Piso Térmico, para saber qual é cada ambiente.
Campos de configuração
Campo
Descrição
IP Address / Port
Endereço IP e porta HTTP do gateway (padrão 5000).
License Key
Chave de licença para uso do driver.
License Status
Status da licença e tempo restante de avaliação (somente leitura).
Driver Information
Mensagens de status do driver em tempo real (somente leitura).
Developer Debug
Ativa log detalhado para diagnóstico. Deixe desativado em uso normal.
Status Update Time(s)
Intervalo, em segundos, entre as consultas de estado ao gateway (padrão 15).
Discover Devices (botão)
Consulta o gateway e cria os termostatos que ainda não existem no ELAN.
Solução de problemas
Nenhum termostato criado: confira o IP do gateway, a porta 5000 e o License Status, e clique em Discover Devices de novo. Sem licença válida, o driver não consulta o gateway.
Termostato faltando: confira se ele aparece no app Piso Térmico e se está no mesmo Wi-Fi do gateway.
Mudanças feitas no termostato demoram a aparecer no ELAN: reduza o Status Update Time(s).
Licenciamento
Este driver funciona por um período de avaliação de 7 dias. Após esse período, é necessário inserir uma chave de licença para continuar operando.
A chave é inserida no campo License Key do driver ZoomDH Alamo Thermostat Gateway e vale para todos os termostatos dele. As licenças são emitidas e vinculadas por controlador.
This driver integrates the Álamo Piso Térmico heated floor with the Nice/ELAN system over the local network, through the Álamo gateway.
The ZoomDH Alamo Thermostat Gateway driver queries the gateway and creates in ELAN one thermostat for each Wi-Fi thermostat set up in it, identified by its MAC address.
Supported features
Automatic discovery: the thermostats set up in the gateway are created in ELAN as Termostato <MAC>.
On/off:Heat (on) and Off modes for each thermostat.
Heat setpoint: desired floor temperature, in degrees Celsius, up to 34 °C.
Room temperature and state: measured temperature and active heating indication, updated periodically.
Communication status: the gateway is polled at the configured interval and reconnected if it stops answering.
Any feature not specifically listed as supported should be considered unsupported, including renaming thermostats from the driver, saving presets and locking the thermostat.
Prerequisites
Álamo Piso Térmico gateway wired to the same network as the thermostats.
Thermostats set up on Wi-Fi and in the Piso Térmico app, following the manufacturer's instructions.
Gateway reachable from the ELAN controller on HTTP port 5000. Set a fixed IP on the gateway or reserve the IP on the DHCP server.
Internet access on the controller to activate the license.
In the Nice Configurator, open the Climate tab and add a new Communication Device.
Browse to the folder where you saved the driver, select ZoomDH Alamo Thermostat Gateway and click OK.
Enter the IP address of the gateway. The default port is 5000.
Enter the license key in the License Key field, after purchasing it, and check the License Status.
Click Discover Devices. The thermostats appear under Climate > Thermostats, named Termostato <MAC>. Do not add thermostats manually.
Rename the thermostats in the Configurator. Use the MAC address, shown in the Piso Térmico app, to tell which room is which.
Configuration fields
Field
Description
IP Address / Port
IP address and HTTP port of the gateway (default 5000).
License Key
License key for the driver.
License Status
License status and remaining evaluation time (read only).
Driver Information
Driver status messages in real time (read only).
Developer Debug
Enables detailed logging for diagnostics. Keep it disabled in normal use.
Status Update Time(s)
Interval, in seconds, between status polls to the gateway (default 15).
Discover Devices (button)
Queries the gateway and creates the thermostats not yet in ELAN.
Troubleshooting
No thermostats created: check the gateway IP, port 5000 and the License Status, and click Discover Devices again. Without a valid license, the driver does not query the gateway.
Thermostat missing: check that it shows in the Piso Térmico app and is on the same Wi-Fi as the gateway.
Changes made on the thermostat take long to show in ELAN: lower the Status Update Time(s).
Licensing
This driver works for a 7-day evaluation period. After that period, a license key is required to keep it running.
The key is entered in the License Key field of the ZoomDH Alamo Thermostat Gateway driver and covers all its thermostats. Licenses are issued and bound per controller.