Integrates Lutron QS Standalone systems with Control4 through the QSE-CI-NWK-E network interface. The driver finds the devices on the QS link by itself and creates the matching ZOOM Universal drivers.
Requirement:ZoomDH_Universal_Light.c4z,ZoomDH_Universal_Blind.c4zandZoomDH_Universal_Keypad.c4zmust be on the controller. If automatic creation fails, add one instance of each type manually in Composer (this sends the driver to the controller) and run Create Missing Devices.
Discovery tests the zones of each GRAFIK Eye and Energi Savr Node, so it may take a few seconds per device. Progress is shown in Discovered Devices.
| Lutron device | Driver created | Notes |
|---|---|---|
| GRAFIK Eye QS | Universal Light (one per zone) + Universal Keypad (scene buttons) | Level 0–100% with ramp. Keypad with Scene 1–4 and Off; the active scene is in a gateway variable. |
| Energi Savr Node QS (0-10 V, Softswitch, Phase Adaptive, DALI, EcoSystem) | Universal Light (one per zone) | Level 0–100% with ramp (up to 90 seconds). Only zones configured in the Energi Savr Node show up. |
| QS motor module (QSE-CI-4M-D) | Universal Blind (one per output) | Open, close and stop only. Use Use Levels = Off and set the travel times. |
| Sivoia QS shade | Universal Blind | Real position 0–100%. Use Use Levels = On and Advanced Motor = On. |
| seeTouch QS keypad (including Int’l) | Universal Keypad | Press, release and hold events per button. |
| Wallbox Input Closure Interface (QSE-CI-WCI) | Universal Keypad | One button per input (up to 8). |
| Pico (associated with a QS Sensor Module) | Universal Keypad | On, Favorite, Off, Raise and Lower buttons. Each Pico shows up in Control4 the first time one of its buttons is pressed. |
| Others (QSE-IO etc.) | — | Ignored; listed in Unknown Devices. |
If a keypad has a button outside the default layout, it is added to the Control4 keypad automatically the first time it is pressed (up to 10 buttons).
In QS Standalone, Lutron does not allow keypad LEDs to be controlled through integration: they keep following the keypad's own programming.
In QS Standalone, Picos talk to the system through the QS Sensor Module, which does not report which Picos are associated. After discovery, press one button on each Pico: the "<sensor module> Pico N" keypad is created at that moment and responds from the next press on.
In QS Standalone, devices have no name or room. The driver uses the Integration ID stored in the interface (e.g. Living GRAFIK Zone 2); without one it uses the type and serial number (e.g. GRAFIK Eye 00AC123D Zone 2). The serial number is also on the device label.
All devices are created in the gateway room. Once created they can be renamed and moved freely: the link to the Lutron device does not change.
| Property | Description |
|---|---|
| IP Address | QSE-CI-NWK-E IP. |
| Port | Interface port (default 23). |
| Login / Password | Interface access. The default login is pre-filled; the password is only used if the interface asks for one. |
| Connection Status | Connection state. |
| Interface | Interface model, serial number and firmware. |
| Discovered Devices | Number of zones, shades and keypads found. |
| Unknown Devices | QS link devices the driver does not control. |
| GRAFIK Eye Scenes | Active scene of each GRAFIK Eye. |
| Auto Create Devices | New Only (default): only creates what discovery found for the first time; a driver deleted on purpose does not come back. New and Missing: also recreates missing ones. No: creates nothing by itself. |
| Auto Discover On Connect | Runs discovery on the first connection if nothing has been discovered yet. |
| License Key / License Status | Driver license (see Licensing). |
| Log Level / Log Mode | Log detail for troubleshooting. |
| Action | Description |
|---|---|
| Discover Devices | Looks for the devices on the QS link. Running it again duplicates nothing and adds new devices. |
| Create Missing Devices | Creates the Universal drivers that are missing. |
| Refresh All | Refreshes the level of every zone and shade and the GRAFIK Eye scenes. |
| Reconnect | Reconnects to the interface. |
| Select GRAFIK Eye Scene | Activates a scene on the chosen GRAFIK Eye. |
| Show Devices | Lists the devices found and the drivers created in the Lua log. |
| Send Command (diagnostics) | For technical support (only with support mode enabled). |
| Clear Discovery | Removes all connections and everything discovered (confirm with Yes). Universal drivers are not deleted. |
| Item | Description |
|---|---|
| Select Scene command | Activates the chosen scene (0 = Off) on the chosen GRAFIK Eye. |
| Scene Changed event | A GRAFIK Eye changed scene (from Control4, the GRAFIK Eye itself or a keypad). |
| <name> Scene variables | Active scene of each GRAFIK Eye, for use in conditionals. |
When Keypad Entry → Button 1 pressed
Do ZOOM Lutron QS Standalone Gateway → Select Scene "Living GRAFIK" scene 2
| Symptom | Likely cause / fix |
|---|---|
| Connection timeout | Wrong IP or interface off the network. |
| Login failed | Wrong login or password. Check whether the interface has a password set. |
| No devices answered | The interface does not see the QS link: check the link wiring and device power. |
| Device in Unknown Devices | Type not supported yet. Send the property text to support. |
| GRAFIK Eye or Energi Savr without zones | The device did not answer during discovery. Run Discover Devices again. |
| Keypad button does not trigger in Control4 | Check in the interface that button events are enabled for integration. |
| Universal driver not created | Driver missing on the controller; see Requirement in Installation. |
To investigate, use Log Level = 5 - Trace and Log Mode = Print: all communication shows in Composer's Lua tab.
| Operation | Trial active | Trial expired |
|---|---|---|
| Connection and discovery | OK | OK |
| Level, scene and button feedback | OK | OK |
| Light commands (level, ramp) | OK | Blocked |
| Shade commands (open, close, position) | OK | Blocked |
| Select Scene | OK | Blocked |
| Version | Date | Description |
|---|---|---|
| 20261120 | 11/20/2026 | Initial version: GRAFIK Eye QS and Energi Savr Node (0-10 V, DALI and EcoSystem) zones as lights, Sivoia QS shades, motor module outputs, seeTouch QS keypads, input closure interfaces and Picos, and GRAFIK Eye scenes, all found and created automatically. |