Sensors Monitor watches a group of sensors in the project (motion, door, window, beam, pressure, gate, garage) and notifies when any of them triggers. It is ideal for watching an area while the alarm is off, knowing when someone enters a room, or driving a siren, light or camera.
One notice per occurrence: the first trigger fires the event and the notification; new triggers only notify again after every sensor has been idle for the chosen time.
Turned on and off from the Navigator icon, keypad buttons or programming.
Contact and relay outputs to bind to other devices or use in programming.
Notifications through ZOOM Universal Notifier: push, WhatsApp, Telegram, e-mail or webhook.
Prerequisites
Control4 controller running OS 3.0 or later.
Sensors already installed and working in the project.
For notifications: the ZOOM Universal Notifier driver (no cost for ZOOM driver users).
Installation
Add the ZOOM – Sensors Monitor driver to the desired room. The room name is used in the device name.
In Monitored Sensors, pick the sensors to watch.
Set Clear Status Timer (sec): how long every sensor must stay idle before the monitor notifies again.
For notifications, bind the Notifier connection to ZOOM Universal Notifier (bound automatically when there is only one Notifier).
To show the icon, in each room go to Navigator → Menu Settings and set Sensors Monitor as Visible.
How it works
Idle: no sensor triggered. The next trigger fires the Sensor Fired event and the notification, opens the Status Sensor contact and closes the Status Relay.
Triggered: while any sensor is triggered, new triggers do not repeat the notice.
Back to idle: when every sensor has been idle for the Clear Status Timer, the driver fires Sensors Status Cleared, closes the contact and opens the relay.
Disabled: sensors are ignored. When turned back on, the monitor takes each sensor's current state into account.
Each sensor's state is read when the controller starts: a door left open is still taken into account, and restarting does not create a false notice.
A keypad button bound to Monitored Keypad Buttons works as one more sensor and fires the Button Pressed event.
Notifications
Notices go out through ZOOM Universal Notifier, which picks the channels (Control4 push, WhatsApp, Telegram, e-mail, webhook). In Send Notifications you pick what this monitor sends:
Notice
Severity
Alerts Only
All Events
Sensor triggered
Warning
Yes
Yes
Monitored button pressed
Warning
Yes
Yes
Sensors back to normal
Info
No
Yes
Monitor enabled / disabled
Info
No
Yes
Message from programming
Info
No
Yes
If you used the push and e-mail options of previous versions, add the Notifier to the project and set up the channels there.
Properties
Property
Description
License Key / License Status
ZOOM license (see Licensing).
Driver Information
Current status: on or off, how many sensors, which ones are triggered.
Monitored Sensors
Sensors being watched.
Clear Status Timer (sec)
Time with every sensor idle before the monitor notifies again (1 to 86400 seconds).
Contact Sensor State / Relay State
Current state of the Status Sensor and Status Relay outputs.
Active Sensors
Sensors triggered right now.
Last Trigger
Date, time and sensor of the last notice.
Send Notifications
All Events, Alerts Only or Off (see Notifications).
Enabled LED Color / Disabled LED Color
LED colors of keypad buttons bound to Enable, Disable and Toggle.
Log Level / Log Mode / ZOOMDH Debug
Event logging and support.
Composer Actions
Action
Description
Enable / Disable
Turns the monitor on or off.
Simulate Sensor Trigger
Simulates a trigger (back to idle after 5 seconds) to test events, outputs and notifications.
Programming and connections
Events
Sensor Fired: first trigger of an occurrence.
Sensors Status Cleared: every sensor is back to idle.
Button Pressed: monitored button pressed.
Commands
ENABLE, DISABLE, TOGGLE: turn the monitor on, off or toggle it.
SEND NOTIFICATION: sends a free-text message through the Notifier. The SEND PUSH and SEND EMAIL commands from older programming keep working and also go out through the Notifier.
Variables
ENABLED: monitor on.
STATUS_CLEARED: every sensor idle.
Connections
Status Sensor (contact): opens on trigger, closes when idle.
Status Relay (relay): closes on trigger, opens when idle. Bind it to a siren, light or another relay.
Enable, Disable, Toggle: keypad buttons to control the monitor, with an LED showing its state.
Monitored Keypad Buttons: keypad buttons handled as sensors.
Notifier: link to ZOOM Universal Notifier.
Troubleshooting
Symptom
What to check
Does not notify again after the first trigger
A sensor is still triggered (see Active Sensors) or the Clear Status Timer has not elapsed yet. A motion sensor in a busy area can keep the monitor busy; lower the time or remove that sensor.
No notice reaches the phone
Check the Notifier connection, the Send Notifications property and the channels in ZOOM Universal Notifier.
Icon does not change in Navigator
Check that the driver is visible in the room (Navigator → Menu Settings).
Triggers ignored
See License Status: the trial period may have ended.
Licensing
Includes a 720-hour (30-day) trial; remaining time in License Status.
After purchasing a license, enter the key in License Key.
The controller needs internet access to activate and recheck the license. A brief internet outage does not turn the driver off.
Once a day, also during the trial, the driver reports technical installation data to the license server (controller model and version, driver version, project name and license status). No personal data is sent. When a new driver version is available, it shows in License Status with a link to the driver page on the website.
What the license controls
Operation
Valid license / trial
No license
Turn the monitor on and off
OK
OK
Events and outputs when sensors and buttons trigger
More stability: notifications no longer stop after the controller restarts, sensor states are kept across restarts (no false notice and no missed open door) and the on/off state is restored correctly. The license no longer drops on a brief internet outage. Notifications through ZOOM Universal Notifier (push, WhatsApp, Telegram, e-mail). New Active Sensors and Last Trigger properties, TOGGLE command and new documentation. Updated link to the ZOOM Universal Notifier: use the Notifier from 11/19/2026 or newer.