Driver for integrating Intelbras AMT 2000 and AMT 4000 series alarm panels with Control4 over an Ethernet IP connection.
Partitions and zones are configured in the driver to match the panel, and the default arm and disarm action can apply to each partition or to all of them together. Non-partitioned panels are treated as partition 1.
Installation
- Set the IP and TCP port according to the panel configuration.
- Select the panel line in “Type of System” (2xxx or 4xxx).
- Adjust “Status Update Time” (default 5 seconds).
- Enter the master code or a code created for Control4 in “Master Password”.
- Configure partitions and zones as on the panel; for non-partitioned panels, use partition 1.
Features
- AMT 2000 and AMT 4000 panel integration over Ethernet
- Security panel with partitions and zones
- Arm and disarm partitions individually or all together
- Arm in Stay mode, including on non-partitioned panels
- Status refresh at a configurable interval
- Battery failure notification once a day
Requirements
- Panel master code or a code created for the automation
More details about this driver: drivers@zoomdigitalhome.com.br
