Integration driver for Lutron HomeWorks QSX and RadioRA 3 processors over the LEAP protocol, the same one used by the Lutron app. It works as a gateway in Control4: it reads the processor project, finds the lighting zones, shades and keypads and automatically creates a ZoomDH Universal driver for each one, placed in the room matching the Lutron area.
Pairing is done from Composer Pro itself: just press the button on the processor. Once paired, the pairing is saved and survives restarts and driver updates.
Zone levels and button events arrive in real time, with no polling. The scenes (virtual buttons) programmed in Lutron Designer are available as commands in Control4 programming.
Installation
- Add the ZoomDH – Lutron LEAP Gateway driver to the project in Composer Pro.
- Fill in the IP Address property with the Lutron processor IP.
- Run the Pair Processor action and, when Pairing Status asks for it, press the pairing button on the processor (within 3 minutes).
- With Connection Status = Connected, run Discover Devices.
- The Universal Light, Universal Blind and Universal Keypad drivers are created and bound automatically, each in the room named after the Lutron area. They need to be in the Documents\Control4\Drivers folder.
- Adjust the properties of each device created.
Features
- Pairing directly from Composer, by pressing the button on the processor
- Discovers the zones, shades and keypads of the Lutron project and creates the matching ZoomDH Universal drivers, already bound
- Creates each device in the Control4 room with the same name as the Lutron area (and creates the room if it does not exist)
- Dimmers, color temperature (CCT) lights and on/off loads
- Shades and blinds with real position from 0 to 100%, and open/close/stop motors
- Keypads and Picos with Press, Release and Hold events per button
- Lutron virtual buttons (scenes) available in programming
- Real-time feedback, no polling
- Automatic reconnection, with feedback restored on every reconnection
Requirements
- HomeWorks QSX or RadioRA 3 processor with the project transferred from Lutron Designer
- Control4 controller with OS 3.4.1 or later
- Controller and processor on the same local network
- Physical access to the processor to press the pairing button
- ZoomDH Universal Light, Universal Blind and Universal Keypad drivers (included in the package)
Release notes
- 20261021
Initial release — Lutron HomeWorks QSX / RadioRA 3 integration over LEAP. Pairing from Composer. Discovery and automatic creation of Universal Light, Blind and Keypad. Support for OpenCloseStop zones (motor modules without position). Automatic reconnection with event re-subscription. Validated on HomeWorks QSX (HQP7-1, LEAP 3.251).
